Green Mfg

700 Series Standard Tooth

$1.49-to$9.99
SKU:

Greenteeth® reduce the time and money spent on every stump. Each tooth has three cutting edges, and you can easily switch to a fresh edge with simple tools, without removing the pocket. High-quality carbide gives these teeth superior wear resistance. Appropriate for most standard stump grinding machines ranging from 20 to 45hp.

Active slide of 700 Series Standard Tooth
Pick: (Required)

Description

Greenteeth® reduce the time and money spent on every stump. Each tooth has three cutting edges, and you can easily switch to a fresh edge with simple tools, without removing the pocket. High-quality carbide gives these teeth superior wear resistance. Appropriate for most standard stump grinding machines ranging from 20 to 45hp.

Details

Red teeth have a deeper concave making the edge less blunt, therefore better for sandy conditions or soft woods. The green teeth have a more shallow concave, making the edge more blunt and better for adverse conditions and rocky soil. Materials and price are the same.

Use with 700 series pockets, available in straight, angle & reverse.

Teeth should be rotated or changed when they start to dull, which decreases their performance. With the red and green Greenteeth, this will usually occur when they round off about 1/16” on the edge.

Wrench size: 9/16”

Torque: 25 FT-LBS (34Nm)

Warning: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Material:
Carbide Steel
Country of Manufacture:
US
Manufacturer Part Number:
700TH-G
Product Type:
700 Series