Description
Greenteeth® reduce the time and money spent on every stump. Each tooth has up to three cutting edges, and you can easily switch to a fresh edge with simple tools without removing the pocket. Made with the same high-quality carbide as the original Greenteeth, Wearsharp teeth provide a more consistent cut throughout the life of the tooth. Appropriate for most standard stump grinding machines ranging from 40 to 85hp.
Details
Through extensive research & development, Greenteeth improved upon their original Greenteeth by altering the concave of the tooth. The patented design of the Wearsharp allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.
Use with 900 series LoPro® pockets, available in straight, angle & reverse.
Wearsharp teeth should be rotated or changed before the diameter starts to decrease or when performance is reduced.
Wrench Size: 5/8″
Torque: 35 Ft-LBS (47Nm)
900-WS and 900-WS2: Wheels 23" and larger
926-WS and 926-WS2: Wheels up to 23"
| Part Number | Description | Compatibility |
| 900-WS | Wearsharp (23" wheels and larger) | 900 Series LoPro Pockets |
| 900-WS2 | Wearsharp 2-Sided Shank (23" wheels and larger) | 900 Series LoPro Pockets, Reverse-S |
| 926-WS | Wearsharp (wheels less than 23") | 900 Series LoPro Pockets |
| 926-WS2 | Wearsharp 2-Sided Shank (wheels less than 23") | 900 Series LoPro Pockets, Greenwheel, Quadwheel, and Performance Upgrades |
Warning: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Material:
- Carbide Steel
- Manufacturer Part Number:
- 900-WS
- Product Type:
- 900 Series
